Sealer for all types of CBS™ High Security straws
Simply introduce thestraw end in the guide and, with one push on the button or foot switch the thermal pulse seal closes the straw absolutely airtight. Then the opposite end of the straw is sealed, after introduction of an identification rod and / or label OR around the straw a jacket that can be pre-identified or printed on SIDE after sealing. The small footprint of the SYMS makes it easy to place under a laminar flow hood for sterile working conditions. The sealing area can be taken apart and easily decontaminated with ethanol or other non corrosive decontamination liquids.
SYMS is compatible with all CBS™ High Security straws.
The SYMS sealer comes complete with cables, foot switch and a maintenance kit.
Technical specifications
Setup, maintenance and downtime time are approximately 5 minutes per day.
Potentially contaminated parts of the system can be cleaned with ethanol or non-corrosive decontamination fluids.
Dimensions
SYMS
L x W x H: 230 x 220 x 170 mm
Weight: 6 kg (13 lb)
Electrical requirements: 220V/50 Hz or 110V/60 Hz